RF lifting and Non-invasive Carboxy therapy beauty machine PX-4000+ is an innovative technology in modern aesthetics.
Key benefits of the PX-4000+
2 advanced esthetic technologies in one machine
Special RF technology development by Alvi Prague
Temperature control unit built in each handpiece that makes the treatment safe and comfortable
Wide touch screen control panel
3 radiofrequency handpieces: bipolar, multipolar of medium size, multipolar of big size
Accuracy of treatment
Unique attractive design
One of the key benefits of the PX-4000+ is sensor-based temperature control unit, built-in each nozzle. Temperature control sensor shows the temperature of skin tissues heating. Collagen and elastin are produced in dermal fibroblasts due to deep heating of skin tissue. Temperature control indicator built in front panel of the machine helps to avoid skin burning and overheating. The comfort temperature for the lifting treatment is 42 degrees Celsius, for lipolysis is 43 degrees Celsius.
Radiofrequency (RF) treatment
RF energy treatment is a modern technology used for non-surgical skin tightening on early signs of loose or sagging skin.
It is an electrical current technology with a frequency range of 0.1 to 5 MHz. Pure RF energy alone is primarily used to treat skin laxity through facial tightening, and it is best suited for patients with mild to moderate facial tissue sagging.
By applying RF energy, which conducts current to mimic electrical circuits to the skin, any resistance encountered by the energy flow will produce heat at the site of maximum resistance. Via this treatment, radio waves penetrate the patient’s outer skin layers, delivering heat energy to the deep dermal layers. This energy stimulates collagen production and that, in turn, triggers tissue contraction. The overall result is tighter, brighter skin, and a significant reduction in sags and wrinkles. Radiofrequency energy is primarily used to treat skin laxity through facial tightening, but the treatment also improves skin tone and texture.
Because it is non-invasive, there is no downtime or recovery. Results are immediately noticeable, and they become even more so in the weeks following the treatment as the build-up of collagen stimulates further skin contraction.
Radiofrequency lifting is the most effective for lifting the skin around eyes, in eyebrows area, in the area of cheeks and nasolabial folds, neck and décolleté area.
RF lifting treatment is widely used as an additional course in slimming programs that helps to get rid of skin laxity, sagged skin and stretch marks that become more evident after body slimming treatment of excess fat elimination.
wrinkles around eyes ‘crow’s feet’
deep expression lines in nasolabial area and on the forehead
fat deposits in problem areas
loss of skin elasticity
Face and Body Tightening:
Clean the area of skin that will be treated
Apply RF conductive gel onto the skin
Select minimum intensity level onto the machine, starting at low intensity and increasing steadily throughout the procedure
Always keep the handpiece moving-- do not hold it still in one area
Apply a moisturizing and cooling mask after treatment
Tips to make treatments especially successful
Divide the treated area by zones (forehead, right and left around eye area, right and left cheeks, right and left jaw line, right and left neck sides); work on each area till required temperature level, then go to the next area.
The machine has a special audio system. When the audio signal is raised it is necessary to change the treatment area. As the researches shows, the more intensive collagen production takes place at the temperature of 40-42 degrees Celsius. If temperature is over 42˚C temperature control unit is actuated and warning audio signal is raised. When you achieved the necessary temperature level, treat the area 2-3 minutes. Then change the area of treatment. If the patient fells some discomfort, it is necessary to reduce the intensity and to treat the area with more quicker movements but keeping the achieved temperature.
Use a sufficient amount of conductive gel and add more if needed.
To improve the results of RF treatment, provide diamond microdermabrasion prior to peel away the external layer of the epidermis and stimulate rejuvenation.
Prepare your clients to see the first maximum visual lifting results within about 3 weeks (21 days) after the first treatment, due to the fact that 21 days is the average life cycle of cells. This time is needed for new collagen production.
If the patient has a very sensitive skin or low pain threshold, it is recommended to low the initial temperature on 1-2 degrees. The average treatment time is 25-30 minutes (5-7 minutes for one area: face, neck, décolleté)
PX-4000+ beauty machine is equipped with 3 RF handpieces
Bipolar: The smallest nozzle that is used in such delicate areas as orbital area (around eyes), eyebrows and eyelids (insertion depth is 2 mm). It is recommended to run 5-10 treatments spaced one week apart. The treatment effect can be observed after the first treatment in improving of metabolic process and blood circulation. As the result, skin complexion is refreshed, skin elasticity is improved and skin tissues are lifted.
Multipolar facial: it is the nozzle with three or more electrodes. The depth of treatment effect is 1.5 cm. It is used for facial, neck and décolleté area and internal surface of arms.
Multipolar for body treatment: it is the biggest nozzle that is used for big areas treatment. It is used for deep heating of subcutaneous tissues in cellulite treatment. It is recommended to run 8 up to 10 treatments spaced 5-7 days apart. For weight loss treatment it is supposed to run 10 up to 12 treatments spaced 5-7 days apart. For better result, it is necessary to keep on a proper balanced diet while running the treatment course.
The machine comes with a unique Carbomed capsules and the treatment gel.
When the capsule and treatment gel, consisting of natural ingredients and rich in nutrients, contact with each other, a chemical reaction is created on the surface of the skin and CO2 is generated.
On the skin, the effect of "foaming" is created. Carbon dioxide gas (CO2) has unique properties. Introducing into the body, it increases skin oxygenation. As a result, the circulation is accelerated, lymph drainage is improved, metabolism is stimulated. The treatment result is increased due to the fact that carbon dioxide gas mixed with tissue fluid neutralizes alkaline pH.
During the treatment session, absorption of the active ingredients of skin care products is greatly enhanced. This method allows to treat virtually any skin area.
Effective and delicate skin cleansing
The unique formulas of treatment gels provide
Maximum absorption of nutrients.
12 capsules of CarboMed
Skin whitening gel - 120 ml
Skin rejuvenation gel - 120 ml
PX-4000+ beauty machine is the best choice to run facial and body treatment; it is a combination of efficacy and safety, which harmoniously combines "price + quality."