Welcome to the online shop of beauty equipment company Alvi Prague
PX-3000 Radiofrequency Machine
- Produced by: Alvi Prague
- Country: Czech Republic
- Type of equipment: Beauty equipment
- Warranty: 18 mon.
- Product No: 20216
1 455 EUR
PX-3000 Radiofrequency Machine with temperature control is a cutting-edge technology in modern aesthetics.
PX-3000 Radiofrequency Machine with LCD 7’’ screen is suitable in operation. Temperature control indicator built in front panel of the machine helps to avoid skin burning and overheating. The comfort temperature for the lifting treatment is 42 degrees Celsius, for lipolysis is 43 degrees Celsius. One of the key benefits of the PX-3000 is sensor-based temperature control unit, built-in each nozzle. Temperature control sensor shows the temperature of skin tissues heating. Collagen and elastin are produced in dermal fibroblasts due to deep heating of skin tissue. Fatty cells are degraded. This kind of treatment helps to reduce body fat deposits.
Radiofrequency lifting is the most effective for lifting the skin around eyes, in eyebrows area, in the area of cheeks and nasolabial folds, neck and décolleté area.
RF lifting treatment is widely used as an additional course in slimming programs that helps to get rid of skin laxity, sagged skin and stretch marks that become more evident after body slimming treatment of excess fat elimination.
PX-3000 Radiofrequency Machine is equipped with 3 handpieces
- Bipolar: The smallest nozzle that is used in such delicate areas as orbital area (around eyes), eyebrows and eyelids (insertion depth is 2 mm). It is recommended to run 5-10 treatments spaced one week apart. The treatment effect can be observed after the first treatment in improving of metabolic process and blood circulation. As the result, skin complexion is refreshed, skin elasticity is improved and skin tissues are lifted.
- Multipolar facial: it is the nozzle with three or more electrodes. The depth of treatment effect is 1.5 cm. It is used for facial, neck and décolleté area and internal surface of arms.
- Multipolar for body treatment: it is the biggest nozzle that is used for big areas treatment. It is used for deep heating of subcutaneous tissues in cellulite treatment. It is recommended to run 8 up to 10 treatments spaced 5-7 days apart. For weight loss treatment it is supposed to run 10 up to 12 treatments spaced 5-7 days apart. For better result, it is necessary to keep on a proper balanced diet while running the treatment course.
Key benefits of the PX-3000
- Special RF technology development by Alvi Prague
- Temperature control unit built in each handpiece that makes the treatment safe and comfortable
- Wide touch screen control panel
- 3 handpieces: bipolar, multipolar of medium size, multipolar of big size
- Effectiveness
- Accuracy of treatment
- Unique attractive design
Indications for Radiofrequency skin treatment
Face:
- skin aging;
- ptosis;
- sagged skin;
- wrinkles around eyes ‘crow’s feet’;
- deep expression lines in nasolabial area and on the forehead;
- acne scars;
- photoaging.
Body:
- fat deposits in problem areas;
- cellulite;
- stretch marks;
- loss of skin elasticity;
- sagged skin;
- photoaging.
PX-3000 Radiofrequency Machine provides radiofrequency lifting with no downtime. It is suitable for all skin types and for different areas of treatment.
Treatment method
Face and Body Tightening:
- Clean the area of skin that will be treated.
- Apply RF conductive gel onto the skin.
- Select minimum intensity level onto the machine, starting at low intensity and increasing steadily throughout the procedure.
- Always keep the handpiece moving - do not hold it still in one area.
- Apply a moisturizing and cooling mask after treatment.
Tips to make treatments especially successful
Divide the treated area by zones (forehead, right and left around eye area, right and left cheeks, right and left jaw line, right and left neck sides); work on each area till required temperature level, then go to the next area.
The machine is equipped by special audio system. When the audio signal is raised it is necessary to change the treatment area. As the researches shows, the more intensive collagen production takes place at the temperature of 40-42 degrees Celsius. If temperature is over 42˚ C temperature control unit is actuated and warning audio signal is raised. When you achieved the necessary temperature level, treat the area 2-3 minutes. Then change the area of treatment. If the patient fells some discomfort, it is necessary to reduce the intensity and to treat the area with more quicker movements but keeping the achieved temperature.
Use a sufficient amount of conductive gel and add more if needed.
To improve the results of RF treatment, provide diamond microdermabrasion prior to peel away the external layer of the epidermis and stimulate rejuvenation.
Prepare your clients to see the first maximum visual lifting results within about 3 weeks (21 days) after the first treatment, due to the fact that 21 days is the average life cycle of cells. This time is needed for new collagen production.
If the patient has a very sensitive skin or low pain threshold, it is recommended to low the initial temperature on 1-2 degrees. The average treatment time is 25-30 minutes (5-7 minutes for one area: face, neck, décolleté)
PX-3000 Radiofrequency Machine is the best choice to run facial and body treatment; it is a combination of efficacy and safety, which harmoniously combines "price + quality."
Preview basket
Минимальная длина строки для поиска 3 символа!
Максимальная длина строки для поиска 64 символа!
- +447 441 915 811
- +38 096 404 74 95
(
WhatsApp,
Viber)
alvi-prague.de
alvi-prague.cz
alvi-prague.pl
alvi-prague.it
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
.png){kind=icon}
